Publications
Instruction for authors of papers
Instruction for preparing abstracts
LIST OF SUBMITTED PAPERS:
PLENARY SESSION
1. Gerald Pollack
The Secret Life of Water: E=H2O
2. Mae-Wan Ho
Living H2O
3. K. Uto, H. Seki, T. Murase, S. Takagishi, Y. Kosugi
Development of a portable human skin detector based on active infrared illumination
4. P. Louda, M. Fjiałkowski, Z. Rożek, T. Bakalova
Potential applications of the nonwoven polymer mats - review
5. S. Šturm, K. Žužek Rožman, B. Markoli, A. C. Cefalas, S. Kobe
Synthesis and characterization of multifunctional hollow nanomaterials for drug delivery and therapy
6. Z. S. Petrović, M. Ionescu, M. Deep Sandhu
Polymers from renewable raw materials from corn: isosorbide-based epoxy resins
7. P. McGuiness, Z. Samardžija, M. Soderžnik, S. Kobe
Microstructural and compositional characterization of Terbium doped Nd-Fe-B sintered magnets
8. Reto Strasser
Waiting on bendable photovoltaic strings and fibers
9. M. Zlatanović
Aerodynamic and friction torque influence on longterm operation of cup anemometer
10. T. Pavlović, D. Milosavljević, I. Radonjić, L. Pantić, D. Piršl
Assessment of the possibilities of building integrated PV systems of 1 kW electricity generation in Banja Luka
11. Đ. Koruga
Water: a primordial natural information substrate
12. V. Todorović, N. Vuković, D. Đukanović, M. Kovačević Filipović, J. Debeljak Martačić, J. Cabunac, Ž. Cabunac
In vitro multi-lineage differentiation capacity of human dental pulp stem cells
13. M. Ivanović, J. Vojinović, J. Mandić, O. Jovičić
Stem cells of pulp of the primary teeth as a biomaterial
1. Gerald Pollack
The Secret Life of Water: E=H2O
2. Mae-Wan Ho
Living H2O
3. K. Uto, H. Seki, T. Murase, S. Takagishi, Y. Kosugi
Development of a portable human skin detector based on active infrared illumination
4. P. Louda, M. Fjiałkowski, Z. Rożek, T. Bakalova
Potential applications of the nonwoven polymer mats - review
5. S. Šturm, K. Žužek Rožman, B. Markoli, A. C. Cefalas, S. Kobe
Synthesis and characterization of multifunctional hollow nanomaterials for drug delivery and therapy
6. Z. S. Petrović, M. Ionescu, M. Deep Sandhu
Polymers from renewable raw materials from corn: isosorbide-based epoxy resins
7. P. McGuiness, Z. Samardžija, M. Soderžnik, S. Kobe
Microstructural and compositional characterization of Terbium doped Nd-Fe-B sintered magnets
8. Reto Strasser
Waiting on bendable photovoltaic strings and fibers
9. M. Zlatanović
Aerodynamic and friction torque influence on longterm operation of cup anemometer
10. T. Pavlović, D. Milosavljević, I. Radonjić, L. Pantić, D. Piršl
Assessment of the possibilities of building integrated PV systems of 1 kW electricity generation in Banja Luka
11. Đ. Koruga
Water: a primordial natural information substrate
12. V. Todorović, N. Vuković, D. Đukanović, M. Kovačević Filipović, J. Debeljak Martačić, J. Cabunac, Ž. Cabunac
In vitro multi-lineage differentiation capacity of human dental pulp stem cells
13. M. Ivanović, J. Vojinović, J. Mandić, O. Jovičić
Stem cells of pulp of the primary teeth as a biomaterial
14. J. Vojinović, O. Dolić, S. Sukara, S. Čupić
Treatment of molar incisor hypominerlization with CPP-ACP remineralization paste
15. M. Jokanović
Nanomaterials and potential health risks
ORAL PRESENTATIONS
1. G. N. Mišević
Why and how single cell analysis? New nanоtechnology applications
2. S. Ristić. M. Kulić, N. Ivković, Đ. Božović
Aquaporins
3. Lj. Korugic Karasz, P. Taylor, P. Lahti, F. Karasz
Thermoelectric properties of PPV-based block copolymers and their composites
4. B. Milovanović, M. Popović, V. Radivojević, A. Milovanović, S. Mutavdžin, M. Simić
The ultra high dilution of drugs in the water and treatment of disease
5. D. Debeljković, I. Buzurović, L. Matija, Đ. Koruga
Non-lyapunov stability of singular and singular time delay systems: classical and modern approaches with applications to automatic drug delivery
6. B. Bojović
Image size and sample areas interaction effects at contact lens surface comparison based on fractal dimension
7. J. Munćan, Đ. Koruga
Comparative study of water using nir and opto – magnetic spectroscopy
POSTER SESSION:
Treatment of molar incisor hypominerlization with CPP-ACP remineralization paste
15. M. Jokanović
Nanomaterials and potential health risks
ORAL PRESENTATIONS
1. G. N. Mišević
Why and how single cell analysis? New nanоtechnology applications
2. S. Ristić. M. Kulić, N. Ivković, Đ. Božović
Aquaporins
3. Lj. Korugic Karasz, P. Taylor, P. Lahti, F. Karasz
Thermoelectric properties of PPV-based block copolymers and their composites
4. B. Milovanović, M. Popović, V. Radivojević, A. Milovanović, S. Mutavdžin, M. Simić
The ultra high dilution of drugs in the water and treatment of disease
5. D. Debeljković, I. Buzurović, L. Matija, Đ. Koruga
Non-lyapunov stability of singular and singular time delay systems: classical and modern approaches with applications to automatic drug delivery
6. B. Bojović
Image size and sample areas interaction effects at contact lens surface comparison based on fractal dimension
7. J. Munćan, Đ. Koruga
Comparative study of water using nir and opto – magnetic spectroscopy
POSTER SESSION:
SYMPOSIUM A
Science of matter, condensed matter and physics of solid states
1. S. Zeljković, J. Penavin Škundrić, M. Kotur, M. Gvero, A. Krstić, D. Vranković
Synthesis of Al2O3 nano-sized powder and its application for the removal of copper from aqueous solutions
2. S. Zeljković, J. Penavin Škundrić, S. Sladojević, D. Vranković, G. Krummenacher, J. Ristanović
The investigation of ammonia adsorption onto LaO, LaO,85SrO,15MnO3-δ and LaO,6SrO,4FeO,8CoO,2O3-δ
3. Lj. Balanović, D. Živković, D. Manasijević, N. Štrbac, N. Talijan, V. Ćosović
Comparative investigation of thermodynamic properties for some gallium-based and tin-based binary alloys
4. J. Šetrajčić, D. Mirjanić, V. Zorić, S. Jaćimovski, B. Markoski
Efficient solar photovoltaic conversion using ultrathin coatings
5. S. Pelemiš, D. Rodić, A. Šetrajčić Tomić, J. Šetrajčić, D. Mirjanić
Optical characteristics of symmetrical ultrathin molecular nanofilm
6. B. Škipina, S. Vučenović, Lj. Džambas, J. Šetrajčić
Optical characteristics of asymmetrical ultrathin molecular nanofilm
7. S. Nježić, D. Malivuk, S. Lekić, S. Sekulić, E. Škrgić, Z. Rajilić
Imaging a nanostructure by the Liapunov exponent computation
8. M. Pavlović, R. Fuchs Godec, M. Tomić
Application of vitamin C as a corrosion inhibitor for protection of steel and copper
9. M. Perušić, R. Čelanović, Z. Obrenović, B. Pejović, R. Filipović
Application XRD analysis in the characterization of powder materials
10. P. Kaluđerčić, S. Obradović, V. Petrović
Printing in three dimensions
11. M. Gojić, S. Kožuh, I. Ivanić, I. Anžel, B. Kosec
Properties of Cu-Al-Ni shape memory alloys
12. V. Mićić, B. Pejović, D. Manjenčić, V. Aleksić
Testing the possibility of using naik's model to calculate total extract yield of hyssop by supercritical extraction
13. V. Damjanović, V. Mićić, Ž. Lepojević, M. Jotanović
Antioxidant activity of ethanolic extract of marigold (calendula officinalis l.)
14. B. Pejović, Lj. Vasiljević, V. Mićić, M. Jotanović, M. Perušić
A suggestion how to establish correlation between the real and average specific heat capacity using analytical and graphic methods
15. Z. Petrović, P. Dugić, R. Petrović, V. Aleksić, M. Petković, T. Botić
Chemically activated domestic bauxite and its characteristics
16. D. Lazić, D. Kešelj, J. Penаvin Škundrić, Lj. Vasiljević, J. Mikić
The possibility of synthesis of high-alumina cements from different raw materials
17. D. Jelić, S. Mentus, J. Penavin Škundrić, S. Zeljković
The synthesis of composite powders by reduction of oxide mixtures obtained by citrate gel-combustion procedure.
18. V. Aleksić, Z. Petrović, V. Mićić, P. Dugić
Polymeric membranes and its application
19. S. Papuga, I. Musić, P. Gvero, Lj. Vukić
Preliminary research of waste biomass and plastics pyrolysis process
20. A. Došić, I. Savić, M. Gligorić
Evaluating efficiency in processes of stabilization / solidification of toxic metals
21. V. Mićić, S. Yusup, V. Damjanović, V. Aleksić, Z. Petrović
Supercritical extraction of jatropha curcas l. seeds
22. Lj. Vasiljević, D. Lazić, D. Kešelj, B. Škundrić, S. Sladojević
Influence of organic matters on the morphological features of zeolite NaA type
23. V. Aleksić, Z. Petrović, V. Mićić
Influence of the adjustable parameters of extrusion lines on the productivity of polyethylene film in the shape of hose
24. M. Dugić, P. Dugić, G. Dugić, B. Kojić
Hydrocracked base oils in formulations of metalworking fluids
25. V. Asanović, K. Delijić
The effects of agin on the martensitic transformation temperature and shape memory recovery of Cu-25.7 Zn-3.1Al alloy
26. B. Lončar, S. Stanković
Inluence of electrode materials and manner of electrode surface processing on gas filled surge arresters pulse characteristic in the radiation field
27. M. Vasiljević, T. Mitrović, V. Petrović, S. Obradović, Đ. Milanović
UV water transparency in hydrogen peroxide presence
28. Đ. Milanović, V. Petrović, S. Milanović
UV radiation intensity radiation distribution in square cross section rector
29. S. Jaćimovski, S. Armaković, D. Rodić, I. Šetrajčić, V. Zorić
Temperature dependence of the conductivity of graphene
30. M. Stanojević, M. Šljivić, R. Radonjić
Development of RP models with improved accuracy by advanced polymer materials
31. J. Savanović, R. Zrilić, M. Plavšić
Solidification of weld with two electric arches
32. N. Damjanović, D. Poletan
The regeneration possibility of electro-isolated oils by natural absorbens
33. V. Zorić, J. Šetrajčić, I. Šetrajčić, S. Armaković, S. Gadžurić, S. Jaćimovski, B. Forca
Microtraces – forensic physical evidence in resolving crime
34. D. Bekrić, I. Mileusnić, I. Đuričić, Đ. Koruga
Caracterisation of micro-structure of composite material for wind turbine blade
35. D. Golubović, P. Kovač, B. Savković, M. Gostimirović, D. Ješić
Selection of optimal solution of sludge disposal at municipal wastewater treatment plants
36. N. Štrbac, I. Mihajlović, D. Živković, M. Sokić,V. Andrić, A. Mitovski
Physico-chemical characterization polymetalic concentrate of copper
37. N. Delić, S. Armaković, I. Šetrajčić, S. Cvetković, V. Holodkov
Discrete photon and electron
38. Z. Janjuš, A. Petrović, A. Jovović, R. Prokić Cvetković, P. Ilić, S. Pavlović, B. Arsenović
Analysis of results bending resistance of polypropylene filled with glass powder
39. Z. Ćurguz, D. Mirjanić
Influence of the construction material on radon concentration
40. S. Vučenović, K. Fodor, I. Gut, J. Šetrajčić
Active isolation – variation of trombe’s wall
41. M. Srećković, Z. Latinović, A. Janićijević, Z. Fidanovski, A. Bugarinović, M. Janićijević, S. Radovanović Polić, S. Jevtić
Defining the critical parameters of materials using laser
42. A. Janićijević, S. Savović, S. Kočinac, M. Srećković, M. Davidović, B. Čabrić, A. Maričić,
Stephan’s problem as specific crystal growth analysis
43. M. Plavšić, R. Zrilić, J. Savanović
About new materials for boilers and catalytic tubes of the reformer
44. M. Mirić Milosavljević
Classification of elastic orthotropic materials
45. H. Avdusinović
Model for prediction of residual stresses in the gray iron casting
46. R. Gaćina
The application of some metal ceramic alloys based on WC for cutting drilling crowns in mining
47. V. Đukić, B. Đukić
Kinetics of aging wire hot rolled low carbon steel
48. B. Malinović, J. Mandić
Anodic oxidation of cyanide
49. S. Mićin
Electrochemical deposited zinc alloys – anticorrosion properties
50. V. Đukić, E. Jakupović
Process integration as the basis of eco-production strategy
51. Z. Petrović, P. Dugić, Lj. Halatjanc,O. Lakić, Z. Puntar, Ž. Đurić. A. Ivanović
Quality of motor fuels on the market of Republic of Srpska
52. D. Dobraš, M. Marković, Z. Božičković, Ž. Petrović
Management transfer of heat and mass through the welding arc
53. T. Pavlović, I. Radonjić, D. Milosavljević, D. Piršl
Potential use of concentrating solar power plants in the Republic of Srpska
54. D. Dobraš, Ž. Petrović, Z. Božičković
Modern equipment and methods „MAG” welding
55. D. Petrović, M. Obradović, M. Radović, A. Jovanović, S. Jovanović, D. Baloš, N. Filipović
Modeling of self–healing materials and fitting parameters procedure
56. Ž. Ratković, P. Dakić
Developing production of materials and equipments for exploitation of renewable energy sources for producing electricity in Republic of Srpska
57. Predrag Ilić, Svetlana Ilić, Dubravka Aničić, Zoran Janjuš
Integrated waste management system, as one of the requirements for ecological managеment of waste materials
58. P. Ilić, S. Ilić, D. Aničić, M. Aničić
Chemical leasing as modern model in chemical use
SYMPOSIUM B & C
Biomaterials, Nanomedicine and Water
1. I. Đuričić, I. Mileusnić, D. Stamenković, L. Matija, Đ. Koruga
Characterisation of nanophotonic materials for RGP contact lenses by scanning probe microscopy
2. N. Mitrović, M. Milošević, T. Maneski, A. Petrović, A. Sedmak
Application of 3d digital image correlation method for determining biomaterials’ mechanical properties
3. M. Milošević, N. Mitrović, G. Mladenović, A. Sedmak
Procedure development for tooth cavity preparation during polymerization contraction analysis of dental composite materials
4. Lj. Džambas, J. Šetrajčić, A. Šetrajčić Tomić, S. Armaković, Z. Vukić
Dental nano-biomaterials
5. Đ. Grga, M. Marjanović, I. Hut, Đ. Koruga
Identification and comparison of microbial morphotypes in dental calculus deposits of recently extracted teeth and neolithic teeth samples
6. M. Tomić, D. Stamenković, M. Jokanović, L. Matija, Đ. Koruga
Biocompatibility of fullerenes
7. A. Dragičević, Z. Krivokapić, V. Marković, I. Dimitrijević, L. Matija
In vitro colorectal cancer investigation by opto-magnetic spectroscopy
8. I. Hut, M. Marjanović, V. Miletić, Lj. Petrov, I. Đuričić
Effects of brushing on surface roughness of microhybrid and nanohybrid composite resins
9. M. Sedlar, J. Munćan, Đ. Koruga
Studies using opto-magnetic spectroscopy on the effect of hyperbaric oxygenation treatment
10. J. Šakota Rosić, M. Tomić, D. Šarac, J. Munćan, Đ. Koruga
Nanophotonic contact lenses for glucose detection
11. M. Nikolić, B. Bojović, Đ. Koruga
Nanotechnology and food safety
12. M. Milosavljević, P. Lukić, Z. Golubović
Glucose biosensors
13. J. Munćan
Studies on water using near infrared spectroscopy and aquaphotomics
14. M. Nedić, Đ. Lalić, D. Đukanović
The use of gtr in treatment of class II furcation defects
15. S. Apostolov, Đ. Vaštag, N. Perišić-Janjić, B. Matijević, S. Petrović
Retention behavior and lipophilicity of N-substituted-2-phenylacetamide derivates
16. B. Matijević, Đ. Vaštag, N. Perišić Janjić, S. Apostolov, S. Petrović
Study of newly synthesized amide derivates as potential biologically active compounds
17. V. Mirjanić, S. Čupić, J. Vojinović
Analysis of GC Fuji Ortho LC adhesive with the use of AFM technology
18. Đ. Mirjanić, J. Vojinović, I. Mileusnić, I. Đuričić
AFM examination of tooth enamel treated with acid agents
Science of matter, condensed matter and physics of solid states
1. S. Zeljković, J. Penavin Škundrić, M. Kotur, M. Gvero, A. Krstić, D. Vranković
Synthesis of Al2O3 nano-sized powder and its application for the removal of copper from aqueous solutions
2. S. Zeljković, J. Penavin Škundrić, S. Sladojević, D. Vranković, G. Krummenacher, J. Ristanović
The investigation of ammonia adsorption onto LaO, LaO,85SrO,15MnO3-δ and LaO,6SrO,4FeO,8CoO,2O3-δ
3. Lj. Balanović, D. Živković, D. Manasijević, N. Štrbac, N. Talijan, V. Ćosović
Comparative investigation of thermodynamic properties for some gallium-based and tin-based binary alloys
4. J. Šetrajčić, D. Mirjanić, V. Zorić, S. Jaćimovski, B. Markoski
Efficient solar photovoltaic conversion using ultrathin coatings
5. S. Pelemiš, D. Rodić, A. Šetrajčić Tomić, J. Šetrajčić, D. Mirjanić
Optical characteristics of symmetrical ultrathin molecular nanofilm
6. B. Škipina, S. Vučenović, Lj. Džambas, J. Šetrajčić
Optical characteristics of asymmetrical ultrathin molecular nanofilm
7. S. Nježić, D. Malivuk, S. Lekić, S. Sekulić, E. Škrgić, Z. Rajilić
Imaging a nanostructure by the Liapunov exponent computation
8. M. Pavlović, R. Fuchs Godec, M. Tomić
Application of vitamin C as a corrosion inhibitor for protection of steel and copper
9. M. Perušić, R. Čelanović, Z. Obrenović, B. Pejović, R. Filipović
Application XRD analysis in the characterization of powder materials
10. P. Kaluđerčić, S. Obradović, V. Petrović
Printing in three dimensions
11. M. Gojić, S. Kožuh, I. Ivanić, I. Anžel, B. Kosec
Properties of Cu-Al-Ni shape memory alloys
12. V. Mićić, B. Pejović, D. Manjenčić, V. Aleksić
Testing the possibility of using naik's model to calculate total extract yield of hyssop by supercritical extraction
13. V. Damjanović, V. Mićić, Ž. Lepojević, M. Jotanović
Antioxidant activity of ethanolic extract of marigold (calendula officinalis l.)
14. B. Pejović, Lj. Vasiljević, V. Mićić, M. Jotanović, M. Perušić
A suggestion how to establish correlation between the real and average specific heat capacity using analytical and graphic methods
15. Z. Petrović, P. Dugić, R. Petrović, V. Aleksić, M. Petković, T. Botić
Chemically activated domestic bauxite and its characteristics
16. D. Lazić, D. Kešelj, J. Penаvin Škundrić, Lj. Vasiljević, J. Mikić
The possibility of synthesis of high-alumina cements from different raw materials
17. D. Jelić, S. Mentus, J. Penavin Škundrić, S. Zeljković
The synthesis of composite powders by reduction of oxide mixtures obtained by citrate gel-combustion procedure.
18. V. Aleksić, Z. Petrović, V. Mićić, P. Dugić
Polymeric membranes and its application
19. S. Papuga, I. Musić, P. Gvero, Lj. Vukić
Preliminary research of waste biomass and plastics pyrolysis process
20. A. Došić, I. Savić, M. Gligorić
Evaluating efficiency in processes of stabilization / solidification of toxic metals
21. V. Mićić, S. Yusup, V. Damjanović, V. Aleksić, Z. Petrović
Supercritical extraction of jatropha curcas l. seeds
22. Lj. Vasiljević, D. Lazić, D. Kešelj, B. Škundrić, S. Sladojević
Influence of organic matters on the morphological features of zeolite NaA type
23. V. Aleksić, Z. Petrović, V. Mićić
Influence of the adjustable parameters of extrusion lines on the productivity of polyethylene film in the shape of hose
24. M. Dugić, P. Dugić, G. Dugić, B. Kojić
Hydrocracked base oils in formulations of metalworking fluids
25. V. Asanović, K. Delijić
The effects of agin on the martensitic transformation temperature and shape memory recovery of Cu-25.7 Zn-3.1Al alloy
26. B. Lončar, S. Stanković
Inluence of electrode materials and manner of electrode surface processing on gas filled surge arresters pulse characteristic in the radiation field
27. M. Vasiljević, T. Mitrović, V. Petrović, S. Obradović, Đ. Milanović
UV water transparency in hydrogen peroxide presence
28. Đ. Milanović, V. Petrović, S. Milanović
UV radiation intensity radiation distribution in square cross section rector
29. S. Jaćimovski, S. Armaković, D. Rodić, I. Šetrajčić, V. Zorić
Temperature dependence of the conductivity of graphene
30. M. Stanojević, M. Šljivić, R. Radonjić
Development of RP models with improved accuracy by advanced polymer materials
31. J. Savanović, R. Zrilić, M. Plavšić
Solidification of weld with two electric arches
32. N. Damjanović, D. Poletan
The regeneration possibility of electro-isolated oils by natural absorbens
33. V. Zorić, J. Šetrajčić, I. Šetrajčić, S. Armaković, S. Gadžurić, S. Jaćimovski, B. Forca
Microtraces – forensic physical evidence in resolving crime
34. D. Bekrić, I. Mileusnić, I. Đuričić, Đ. Koruga
Caracterisation of micro-structure of composite material for wind turbine blade
35. D. Golubović, P. Kovač, B. Savković, M. Gostimirović, D. Ješić
Selection of optimal solution of sludge disposal at municipal wastewater treatment plants
36. N. Štrbac, I. Mihajlović, D. Živković, M. Sokić,V. Andrić, A. Mitovski
Physico-chemical characterization polymetalic concentrate of copper
37. N. Delić, S. Armaković, I. Šetrajčić, S. Cvetković, V. Holodkov
Discrete photon and electron
38. Z. Janjuš, A. Petrović, A. Jovović, R. Prokić Cvetković, P. Ilić, S. Pavlović, B. Arsenović
Analysis of results bending resistance of polypropylene filled with glass powder
39. Z. Ćurguz, D. Mirjanić
Influence of the construction material on radon concentration
40. S. Vučenović, K. Fodor, I. Gut, J. Šetrajčić
Active isolation – variation of trombe’s wall
41. M. Srećković, Z. Latinović, A. Janićijević, Z. Fidanovski, A. Bugarinović, M. Janićijević, S. Radovanović Polić, S. Jevtić
Defining the critical parameters of materials using laser
42. A. Janićijević, S. Savović, S. Kočinac, M. Srećković, M. Davidović, B. Čabrić, A. Maričić,
Stephan’s problem as specific crystal growth analysis
43. M. Plavšić, R. Zrilić, J. Savanović
About new materials for boilers and catalytic tubes of the reformer
44. M. Mirić Milosavljević
Classification of elastic orthotropic materials
45. H. Avdusinović
Model for prediction of residual stresses in the gray iron casting
46. R. Gaćina
The application of some metal ceramic alloys based on WC for cutting drilling crowns in mining
47. V. Đukić, B. Đukić
Kinetics of aging wire hot rolled low carbon steel
48. B. Malinović, J. Mandić
Anodic oxidation of cyanide
49. S. Mićin
Electrochemical deposited zinc alloys – anticorrosion properties
50. V. Đukić, E. Jakupović
Process integration as the basis of eco-production strategy
51. Z. Petrović, P. Dugić, Lj. Halatjanc,O. Lakić, Z. Puntar, Ž. Đurić. A. Ivanović
Quality of motor fuels on the market of Republic of Srpska
52. D. Dobraš, M. Marković, Z. Božičković, Ž. Petrović
Management transfer of heat and mass through the welding arc
53. T. Pavlović, I. Radonjić, D. Milosavljević, D. Piršl
Potential use of concentrating solar power plants in the Republic of Srpska
54. D. Dobraš, Ž. Petrović, Z. Božičković
Modern equipment and methods „MAG” welding
55. D. Petrović, M. Obradović, M. Radović, A. Jovanović, S. Jovanović, D. Baloš, N. Filipović
Modeling of self–healing materials and fitting parameters procedure
56. Ž. Ratković, P. Dakić
Developing production of materials and equipments for exploitation of renewable energy sources for producing electricity in Republic of Srpska
57. Predrag Ilić, Svetlana Ilić, Dubravka Aničić, Zoran Janjuš
Integrated waste management system, as one of the requirements for ecological managеment of waste materials
58. P. Ilić, S. Ilić, D. Aničić, M. Aničić
Chemical leasing as modern model in chemical use
SYMPOSIUM B & C
Biomaterials, Nanomedicine and Water
1. I. Đuričić, I. Mileusnić, D. Stamenković, L. Matija, Đ. Koruga
Characterisation of nanophotonic materials for RGP contact lenses by scanning probe microscopy
2. N. Mitrović, M. Milošević, T. Maneski, A. Petrović, A. Sedmak
Application of 3d digital image correlation method for determining biomaterials’ mechanical properties
3. M. Milošević, N. Mitrović, G. Mladenović, A. Sedmak
Procedure development for tooth cavity preparation during polymerization contraction analysis of dental composite materials
4. Lj. Džambas, J. Šetrajčić, A. Šetrajčić Tomić, S. Armaković, Z. Vukić
Dental nano-biomaterials
5. Đ. Grga, M. Marjanović, I. Hut, Đ. Koruga
Identification and comparison of microbial morphotypes in dental calculus deposits of recently extracted teeth and neolithic teeth samples
6. M. Tomić, D. Stamenković, M. Jokanović, L. Matija, Đ. Koruga
Biocompatibility of fullerenes
7. A. Dragičević, Z. Krivokapić, V. Marković, I. Dimitrijević, L. Matija
In vitro colorectal cancer investigation by opto-magnetic spectroscopy
8. I. Hut, M. Marjanović, V. Miletić, Lj. Petrov, I. Đuričić
Effects of brushing on surface roughness of microhybrid and nanohybrid composite resins
9. M. Sedlar, J. Munćan, Đ. Koruga
Studies using opto-magnetic spectroscopy on the effect of hyperbaric oxygenation treatment
10. J. Šakota Rosić, M. Tomić, D. Šarac, J. Munćan, Đ. Koruga
Nanophotonic contact lenses for glucose detection
11. M. Nikolić, B. Bojović, Đ. Koruga
Nanotechnology and food safety
12. M. Milosavljević, P. Lukić, Z. Golubović
Glucose biosensors
13. J. Munćan
Studies on water using near infrared spectroscopy and aquaphotomics
14. M. Nedić, Đ. Lalić, D. Đukanović
The use of gtr in treatment of class II furcation defects
15. S. Apostolov, Đ. Vaštag, N. Perišić-Janjić, B. Matijević, S. Petrović
Retention behavior and lipophilicity of N-substituted-2-phenylacetamide derivates
16. B. Matijević, Đ. Vaštag, N. Perišić Janjić, S. Apostolov, S. Petrović
Study of newly synthesized amide derivates as potential biologically active compounds
17. V. Mirjanić, S. Čupić, J. Vojinović
Analysis of GC Fuji Ortho LC adhesive with the use of AFM technology
18. Đ. Mirjanić, J. Vojinović, I. Mileusnić, I. Đuričić
AFM examination of tooth enamel treated with acid agents
19. J. Vojinović, D. Marković, P. Anđelić, S. Blažić, V. Mirjanić
Fabricated stainless steel crowns in the treatment of destructed primary teeth
20. J. Vojinović, M. Ivanović, M. Obradović, O. Dolić, S. Sukara
The results of treatment of early childhood caries with CPP-ACP remineralizing paste
21. D. Marković, V. Jokanović, J. Vojinović, B. Ćetenović, B. Petrović, T. Perić
The use of mineral oxides based cements in endodontic treatment of teeth with uncompleted root development
The use of mineral oxides based cements in endodontic treatment of teeth with uncompleted root development
22. Đ. Božović, N. Ivković, S. Ristić, V. Mirjanić
Application of elastomers in the making of functional impression in full dentures
23. S. Armaković, J. Šetrajčić, I. Šetrajčić, A. Šetrajčić Tomić,
AB initio study of active components of some β-blockers
24. J. Milanović, M. Kostić, S. Dimitrijević, K. Popović, P. Škundrić
Antibacterial activity of selectively oxidized lyocell fibers
25. A. Kramar, J. Milanović, M. Kostić
Sorption properties of nonselective oxidized cotton fibers
26. M. Dragoljić, J. Penavin Škundrić
The variation in concentration of tetrahydrocannabinol during the time as an indicator of quality samples of plant cannabis sativa L
27. Ž. Cabunac, V. Todorović, J. Cabunac, D. Đukanović
Stabilized hyaluronic acid-based gel of non-animal origin for lip volume enhancement and rejuvenation
28. B. Jeftić, M. Papić Obradović, L. Matija
Cervical cancer detection by opto-magnetic spectroscopy using pap smears
29. A. Debeljković, D. Stamenković, J. Šakota, L. Matija, Đ. Koruga
Classical and nanophotonic soft contact lens materials investigation by uv-vis and opto-magnetic spetroscopy
30. B. Ekmeščić, D. Maksin, Lj. Suručić, J. Marković, Z. Sandić, M. Žunić, A. Nastasović
Adsorptive removal of molybdate onto porous copolymer: kinetics and thermodynamics
31. M. Kojić, M. Milošević, N. Kojić, M. Ferrari, A. Ziemus
Numeric modeling of diffusion in complex media with surface interaction effects
32. Z. Matić, A. Debeljković, S. Nijemčević, L. Matija, Đ. Koruga
Nano-biomimetics: аpplication of nanotechnology in biometrics
33. Z. Vosika
Structural inductivity of the axon
34. G. Janjić, J. Munćan
Skin hydration as a function of the drinking water quality – comparative analysis
35. Č. Lalović, J. Munćan, Đ. Koruga
Biological value of water – the need for new ways of characterization
36. Z. Matić, I. Mileusnić, J. Simić-Krstić, Đ. Koruga
Biomolecular information system based onbiological water, microtubiules and gap junctions
37. V. Munćan, A. Debeljković, N. Stevanović, M. Savanović, Đ. Koruga
Water flow in microtubules as lifeline of cells
38. I. Mileusnić, J. Bandić, J. Munćan, Đ. Koruga
Investigation of skin moisture by opto-magnetic spectroscopy
39. M. Milovanović, P. Lukić, Z. Golubović,
Model of neuromechanical EEG signals